Ender 3 S1 Pro Cura Profile: The Ultimate Guide for Beginners and Experts

How to Download and Use the Ender 3 S1 Pro Profile in Cura

If you are looking for a way to improve your 3D printing results with the Ender 3 S1 Pro, you might want to consider using Cura as your slicer software. Cura is a popular and powerful program that can help you optimize your print settings and create high-quality models. However, to get the best out of Cura, you need to have a good profile for your printer. A profile is a set of parameters that define how your printer will behave and interact with the filament.

ender 3 s1 pro profile download

Download Zip

In this article, we will show you how to create a profile for the Ender 3 S1 Pro in Cura, as well as how to import an existing profile from Creality Slicer, which is another slicer software that comes with the printer. We will also give you some tips on how to calibrate your settings and achieve better prints. By the end of this article, you will be able to download and use the Ender 3 S1 Pro profile in Cura with confidence.

Introduction

What is the Ender 3 S1 Pro?

The Ender 3 S1 Pro is an upgraded version of the Ender 3 S1, which is one of the most popular and affordable 3D printers on the market. The Ender 3 S1 Pro has several features that make it more reliable and convenient than its predecessor, such as:

• A magnetic build plate that allows you to easily remove your prints without damaging them.

• A dual Z-axis lead screw that ensures more stability and accuracy.

• A Meanwell power supply that provides more safety and efficiency.

• A silent motherboard that reduces noise and vibration.

• A filament runout sensor that detects when your filament is about to end and pauses the print.

• A resume printing function that resumes the print from where it left off in case of a power outage or interruption.

The Ender 3 S1 Pro has a build volume of 220 x 220 x 250 mm, which is enough for most hobbyists and enthusiasts. It supports various types of filaments, such as PLA, ABS, TPU, PETG, and more. It has a nozzle diameter of 0.4 mm and a layer resolution of 0.1-0.4 mm. It can print at speeds up to 180 mm/s, depending on the settings and model complexity.

What is Cura and why use it?

Cura is a free and open-source slicer software that converts your 3D model into instructions for your printer. It allows you to customize various aspects of your print, such as temperature, speed, infill, support, retraction, and more. It also has some advanced features, such as adaptive layer height, ironing, tree support, fuzzy skin, and more.

Cura is compatible with most FDM printers, including the Ender 3 S1 Pro. It has a user-friendly interface that makes it easy to use for beginners and experts alike. It also has a large community of users who share their profiles, settings, tips, and tricks online.

Using Cura can help you improve your print quality and save time and filament. It can also help you troubleshoot any issues that might arise during your printing process.

How to create a profile for the Ender 3 S1 Pro in Cura

If you want to create a profile for the Ender 3 S1 Pro in Cura from scratch, you need to follow these steps:

Step 1: Add the printer in Cura

First, you need to add the Ender 3 S1 Pro as a printer in Cura. To do this, open Cura and go to Settings > Printer > Add Printer. A window will pop up where you can choose from a list of predefined printers or add a custom one. Since the Ender 3 S1 Pro is not in the list, you need to select Custom > Add Custom FFF Printer. Then, give your printer a name and click Add.

ender 3 s1 pro cura settings

ender 3 s1 pro best slicer profile

ender 3 s1 pro firmware update

ender 3 s1 pro laser module

ender 3 s1 pro print quality

ender 3 s1 pro vs ender 3 v2

ender 3 s1 pro bed leveling

ender 3 s1 pro calibration guide

ender 3 s1 pro creality slicer

ender 3 s1 pro printing temperature

ender 3 s1 pro retraction settings

ender 3 s1 pro print speed

ender 3 s1 pro layer height

ender 3 s1 pro flow rate

ender 3 s1 pro infill settings

ender 3 s1 pro first layer settings

ender 3 s1 pro supports settings

ender 3 s1 pro cooling settings

ender 3 s1 pro nozzle size

ender 3 s1 pro filament types

ender 3 s1 pro pla profile

ender 3 s1 pro abs profile

ender 3 s1 pro tpu profile

ender 3 s1 pro petg profile

ender 3 s1 pro wood profile

ender 3 s1 pro dual extruder upgrade

ender 3 s1 pro bltouch installation

ender 3 s1 pro silent board upgrade

ender 3 s1 pro direct drive upgrade

ender 3 s1 pro glass bed upgrade

ender 3 s1 pro auto bed leveling

ender 3 s1 pro z offset adjustment

ender 3 s1 pro e steps calibration

ender 3 s1 pro linear advance calibration

ender 3 s1 pro pid tuning

ender 3 s1 pro extruder calibration

ender 3 s1 pro x and y belt tensioning

ender 3 s1 pro hotend assembly

ender 3 s1 pro thermistor replacement

ender 3 s1 pro heater cartridge replacement

ender 3 s1 pro nozzle cleaning

ender 3 s1 pro bowden tube replacement

ender 3 s1 pro coupler replacement

ender 3 s1 pro fan replacement

ender 3 s1 pro power supply replacement

ender 3 s1 pro lcd screen replacement

ender 3 s1 pro motherboard replacement

ender 3 s1 pro stepper motor replacement

Step 2: Define the printer properties

Next, you need to define the printer properties, such as the build volume, nozzle size, heated bed, and start and end g-code. To do this, go to Settings > Printer > Manage Printers. A window will open where you can see your printer settings. Click on Machine Settings and enter the following values:

Property

Value

X (Width)

220 mm

Y (Depth)

220 mm

Z (Height)

250 mm

Gantry height

25 mm

Nozzle size

0.4 mm

Heated bed

Checked

Start G-code

G28 ;HomeG92 E0 ;Reset ExtruderG1 Z2.0 F3000 ;Move Z Axis upG1 X0.1 Y20 Z0.3 F5000.0 ;Move to start positionG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ;Draw the first lineG1 X0.4 Y200.0 Z0.3 F5000.0 ;Move to side a littleG1 X0.4 Y20 Z0.3 F1500.0 E30 ;Draw the second lineG92 E0 ;Reset ExtruderG1 Z2.0 F3000 ;Move Z Axis up

End G-code

G91 ;Relative positioningG1 E-2 F2700 ;Retract a bitG1 E-2 Z0.2 F2400 ;Retract and raise ZG1 X5 Y5 F3000 ;Wipe outG1 Z10 ;Raise Z moreG90 ;Absolute positioningG1 X0 Y220 ;Present printM106 S0 ;Turn-off fanM104 S0 ;Turn-off hotendM140 S0 ;Turn-off bedM84 X Y E ;Disable all steppers but Z

Click Close when you are done.

Step 3: Adjust the print settings

Finally, you need to adjust the print settings according to your preferences and needs. To do this, go to Settings > Profile > Manage Profiles. A window will open where you can see your profile settings. You can either create a new profile or modify an existing one.

The print settings are divided into several categories, such as Quality, Shell, Infill, Material, Speed, Travel, Cooling, Support, Build Plate Adhesion, and Special Modes. You can also enable or disable some experimental features by clicking on Experimental.

The optimal print settings may vary depending on the model, filament, and desired quality. However, here are some general guidelines that you can follow:

• Quality: Set the layer height to 0.2 mm for normal quality or 0.12 mm for high quality. Set the line width to 100% of the nozzle size (i.e., 0.4 mm).

• Shell: Set the wall thickness to a multiple of the line width (e.g., 1.2 mm for three walls). Set the top/bottom thickness to a multiple of the layer height (e.g., 0.8 mm for four layers). Enable ironing for a smoother top surface.

• Infill: Set the infill density to 20% for normal strength or 10% for lightweight models. Choose an infill pattern that suits your needs (e.g., grid, cubic, gyroid, etc.).

• Material: Set the printing temperature and bed temperature according to the filament manufacturer's recommendations. For PLA, a common temperature range is 190-210C for the nozzle and 50-60C for the bed. Set the flow rate to 100% or adjust it based on your calibration results.

• Speed: Set the print speed to 50 mm/s for normal quality or 30 mm/s for high quality. Set the travel speed to 150 mm/s or higher to reduce oozing and stringing. Set the initial layer speed to 20 mm/s or lower to improve adhesion.

• Travel: Enable retraction and set the retraction distance to 5 mm and the retraction speed to 45 mm/s. Adjust these values based on your calibration results. Enable Z-hop when retracted and set the Z-hop height to 0.2 mm or lower to avoid collisions.

• Cooling: Enable cooling fan and set the fan speed to 100% or lower depending on the material. For PLA, a high fan speed is recommended to improve bridging and overhangs. For ABS, a low fan speed or no fan is recommended to prevent warping and cracking.

• Support: Enable support if your model has overhangs that exceed 45 degrees. Choose the support placement (touching build plate or everywhere) and the support structure (lines, zigzag, grid, etc.) that suit your model. Set the support density to 15% or lower to save filament and make it easier to remove.

• Build Plate Adhesion: Choose the build plate adhesion type that suits your model and bed surface. For small models or models with a large contact area, a skirt or brim may be enough. For large models or models with a small contact area, a raft may be needed.

• Special Modes: Enable special modes if you want to use some advanced features, such as spiralize outer contour, mold mode, surface mode, etc. These modes can alter the way your model is sliced and printed, so use them with caution and read the descriptions carefully.

Click Close when you are done.

How to import the Ender 3 S1 Pro profile from Creality Slicer into Cura

If you don't want to create a profile for the Ender 3 S1 Pro in Cura from scratch, you can also import an existing profile from Creality Slicer, which is another slicer software that comes with the printer. Creality Slicer is based on Cura, so it has similar settings and features. However, it has some predefined profiles for different Creality printers, including the Ender 3 S1 Pro.

To import the Ender 3 S1 Pro profile from Creality Slicer into Cura, you need to follow these steps:

Step 1: Download and install Creality Slicer

First, you need to download and install Creality Slicer on your computer. You can find it on the official website of Creality or on the SD card that comes with the printer. The latest version at the time of writing this article is Creality Slicer 4.8.1.

Once you have downloaded the file, run it and follow the instructions to install it on your computer. You may need to restart your computer after the installation is complete.

Step 2: Export the profile from Creality Slicer

Next, you need to export the profile from Creality Slicer as a file that can be imported into Cura. To do this, open Creality Slicer and go to File > Preferences. A window will open where you can see your preferences settings. Click on Profiles and select Ender-3S1 Pro from the drop-down menu. Then, click on Export and choose a location where you want to save the file. The file will have a .curaprofile extension.

Step 3: Import the profile into Cura

Finally, you need to import the profile into Cura and apply it to your printer. To do this, open Cura and go to Settings > Profile > Manage Profiles. A window will open where you can see your profile settings. Click on Import and select the file that you exported from Creality Slicer. The profile will be added to your list of profiles. Then, click on Activate to apply it to your printer.

You can now use the Ender 3 S1 Pro profile in Cura and print your models. However, you may still need to tweak some settings depending on the model, filament, and quality you want.

How to calibrate the Ender 3 S1 Pro Cura settings

Even if you have a good profile for the Ender 3 S1 Pro in Cura, you may still encounter some issues or defects in your prints, such as under or over extrusion, stringing, oozing, warping, curling, etc. These issues can be caused by various factors, such as the environment, the filament quality, the printer condition, etc. Therefore, it is important to calibrate your settings and make sure they are optimal for your printer and filament.

There are many ways to calibrate your settings, but here are some of the most common and useful ones:

How to calibrate the print temperature

The print temperature is one of the most important settings that affects the print quality and performance. If the temperature is too low, the filament may not melt properly and cause under extrusion, poor layer adhesion, weak prints, etc. If the temperature is too high, the filament may ooze and string excessively, cause over extrusion, blobbing, zits, etc.

To calibrate the print temperature, you can use a temperature tower test. A temperature tower is a model that consists of several sections with different temperatures. By printing this model, you can see how each temperature affects the print quality and choose the best one for your filament.

To print a temperature tower test, you need to download a temperature tower model from a website like Thingiverse or create your own using a software like Tinkercad. Then, you need to use a plugin like ChangeAtZ or Post Processing in Cura to change the temperature at each section of the model. For example, you can start with 220C at the bottom section and decrease by 5C every 10 mm until you reach 180C at the top section.

After printing the temperature tower test, you can examine each section and look for any defects or issues. You can also measure the dimensions and accuracy of each section. The best temperature is the one that produces the best print quality and performance without any defects or issues.

How to calibrate the flow rate

The flow rate is another important setting that affects the print quality and performance. The flow rate determines how much filament is extruded by the nozzle per unit of time. If the flow rate is too low, the filament may not fill the gaps between the lines and cause under extrusion, gaps, holes, etc. If the flow rate is too high the filament may overflow and cause over extrusion, blobbing, zits, etc.

To calibrate the flow rate, you can use a flow rate test. A flow rate test is a model that consists of a single wall cube with a known dimension. By printing this model, you can measure the actual thickness of the wall and compare it with the expected thickness based on the line width.

To print a flow rate test, you need to download a flow rate test model from a website like Thingiverse or create your own using a software like Tinkercad. Then, you need to slice it in Cura with the following settings:

• Quality: Set the layer height to 0.2 mm and the line width to 0.4 mm.

• Shell: Set the wall thickness to 0.4 mm and disable top and bottom layers.

• Infill: Set the infill density to 0%.

• Speed: Set the print speed to 50 mm/s or lower.

• Cooling: Set the fan speed to 100%.

After printing the flow rate test, you need to measure the thickness of the wall using a caliper or a ruler. The ideal thickness should be equal to the line width (i.e., 0.4 mm). If the actual thickness is different from the expected thickness, you need to adjust the flow rate accordingly. The formula for calculating the new flow rate is:

New flow rate (%) = Current flow rate (%) x Expected thickness (mm) / Actual thickness (mm)

For example, if your current flow rate is 100% and your actual thickness is 0.5 mm, your new flow rate should be:

New flow rate (%) = 100% x 0.4 mm / 0.5 mm = 80%

You can repeat this process until you get the desired thickness and flow rate.

How to calibrate the retraction

The retraction is another important setting that affects the print quality and performance. The retraction is a mechanism that pulls back the filament from the nozzle when it is not needed, such as during travel moves or changing layers. This prevents the filament from oozing and stringing, which can ruin the appearance and accuracy of your prints.

To calibrate the retraction, you can use a retraction test. A retraction test is a model that consists of several pillars with different distances between them. By printing this model, you can see how well your retraction settings work and how much oozing and stringing occur.

To print a retraction test, you need to download a retraction test model from a website like Thingiverse or create your own using a software like Tinkercad. Then, you need to slice it in Cura with your current retraction settings.

After printing the retraction test, you need to examine each pillar and look for any signs of oozing and stringing. If you see any, you need to adjust your retraction settings accordingly. The main settings that affect the retraction are:

• Retraction distance: The amount of filament that is pulled back from the nozzle during retraction. A higher distance can reduce oozing and stringing, but it can also cause under extrusion or clogging if it is too high.

• Retraction speed: The speed at which the filament is pulled back from the nozzle during retraction. A higher speed can reduce oozing and stringing, but it can also cause filament grinding or skipping if it is too high.

• Z-hop when retracted: A feature that lifts the nozzle slightly above the print surface during retraction. This can prevent the nozzle from colliding with the print or leaving marks on it.

• Z-hop height: The height at which the nozzle is lifted during retraction. A higher height can reduce collisions and marks, but it can also increase the print time and cause stringing if it is too high.

You can experiment with different values for these settings until you find the best combination for your printer and filament. A good starting point is to use the default values in Cura, which are:

• Retraction distance: 5 mm

• Retraction speed: 45 mm/s

• Z-hop when retracted: Enabled

• Z-hop height: 0.2 mm

Conclusion

In this article, we have shown you how to download and use the Ender 3 S1 Pro profile in Cura. We have explained how to create a profile from scratch, how to import a profile from Creality Slicer, and how to calibrate your settings. By following these steps, you can optimize your print quality and performance with the Ender 3 S1 Pro and Cura.

We hope you found this article helpful and informative. If you have any questions or feedback, please feel free to leave a comment below. Happy printing!

FAQs

Here are some of the frequently asked questions about the Ender 3 S1 Pro profile in Cura:

Q: Where can I find more profiles for the Ender 3 S1 Pro in Cura?

A: You can find more profiles for the Ender 3 S1 Pro in Cura on websites like Reddit, Facebook, YouTube, or GitHub. You can also search for profiles for other similar printers, such as the Ender 3 V2 or the Ender 3 Pro, and modify them to suit your needs.

Q: How can I update the firmware of the Ender 3 S1 Pro?

A: You can update the firmware of the Ender 3 S1 Pro by downloading the latest version from the official website of Creality or from a third-party source like Marlin or TH3D. Then, you need to copy the firmware file to an SD card and insert it into the printer. Turn on the printer and wait for the update to complete.

Q: How can I level the bed of the Ender 3 S1 Pro?

A: You can level the bed of the Ender 3 S1 Pro by using the paper method or by using a BLTouch sensor. The paper method involves moving the nozzle to each corner of the bed and adjusting the knobs until a piece of paper can slide between them with some resistance. The BLTouch sensor is an automatic bed leveling device that probes the bed surface and compensates for any unevenness.

Q: How can I clean the nozzle of the Ender 3 S1 Pro?

A: You can clean the nozzle of the Ender 3 S1 Pro by using a needle, a wire brush, or a cold pull method. The needle method involves heating up the nozzle and inserting a thin needle into the nozzle hole to remove any clogs. The wire brush method involves heating up the nozzle and brushing it with a wire brush to remove any residue. The cold pull method involves heating up the nozzle and inserting a piece of filament into it. Then, you need to cool down the nozzle and pull out the filament with a quick motion. This should pull out any debris that is stuck inside the nozzle.

Q: How can I upgrade the Ender 3 S1 Pro?

A: You can upgrade the Ender 3 S1 Pro by adding some accessories or modifications that can enhance its performance and functionality. Some of the most common upgrades are:

• A glass bed or a PEI sheet that can improve the adhesion and smoothness of your prints.

• A metal extruder or a dual gear extruder that can improve the extrusion and feeding of your filament.

• A direct drive or a Bowden tube that can improve the retraction and reduce the stringing and oozing of your filament.

• A dual Z-axis motor or a dual Z-axis belt that can improve the stability and accuracy of your prints.

• A BLTouch sensor or a manual mesh leveling that can improve the bed leveling and compensate for any unevenness.

• A filament guide or a filament holder that can prevent the filament from tangling or snapping.

• A fan duct or a fan shroud that can improve the cooling and airflow of your prints.

• A LED light or a camera that can improve the visibility and monitoring of your prints.

You can find these upgrades on websites like Amazon, AliExpress, Banggood, or eBay. You can also find some tutorials on how to install them on websites like YouTube, Instructables, or Reddit. 44f88ac181